2026-03-10T03:40:51Z https://kanazawa-u.repo.nii.ac.jp/oai

oai:kanazawa-u.repo.nii.ac.jp:00008879 2024-06-20T06:23:22Z 934:935:936

Influence of temperature and process parameters on bending angle in laser forming Sentoku, Eisuke 12589 Ueda, Takashi 10422 60115996 60115996 Yamada, Kenji 12590 Hosokawa, Akira 280 60432134 40199493 40199493 Tanaka, Ryutaro 408 60361979 60361979 Laser-forming is sheet metal bending processing caused by the thermal stresses in the sheet irradiated by a laser beam. Therefore final bending angle of the irradiated sheet depends on the temperature distribution of the sheet. In this study, a thin stainless steel is bended by the irradiation of CO 2 laser. Then both temperatures at irradiated and opposite surfaces are measured using the infrared radiation pyrometer with an optical fiber. And influences of the temperature, thickness of sheet and diameter of laser beam on final bending angle for laser-forming are experimentally investigated. Experimental results show a correlation between the temperature measured and the bending angle achieved. The bending angle linearly increases with an increase of the irradiated surface temperature. In the constant irradiated surface temperature, the increase of diameter of laser beam and the decrease of thickness of material enlarge the bending angle. 金沢大学理工研究域機械工学系 conference paper 精密工学会 = Japan Society for Precision Engineering, 2004-01-01 VoR application/pdf Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004 360 365 https://kanazawa-u.repo.nii.ac.jp/record/8879/files/TE-PR-TANAKA-R-360.pdf http://hdl.handle.net/2297/16911 https://kanazawa-u.repo.nii.ac.jp/records/8879 eng