@article{oai:kanazawa-u.repo.nii.ac.jp:00043968,
 author = {Hosokawa, Akira and Yunoki, Tsutomu and Ueda, Takashi and Yamada, Keiji and Tanaka, Ryutaro and 細川, 晃 and 柚木, 力 and 上田, 隆司 and 山田, 啓司 and 田中, 隆太郎},
 issue = {J61},
 journal = {精密工学会学術講演会講演論文集, 2005 JSPE Spring Meeting},
 month = {},
 note = {This study deals with a laser dressing of a metal-bonded diamond wheel as part of a laser conditioning of superabrasive grinding wheels including truing, sharpening and cleaning. A bronze bond diamond stone SD120N75B is chosen as target to be dressed and pulsed Nd:YAG laser is irradiated in order to remove the bond material. The bond material is partially removed by laser irradiation, in which melting and vaporizing take place. In order to efficiently remove the bond material, it is necessary to spray air on the laser irradiating spot so as to blow away the molten binder before it solidifies again, although the molten metal cannot be perfectly taken away due to its relatively high viscosity. Clear damages of diamond particles such as micro-cracks or graphitization are not observed below the laser power is less than 152 W.Nd:YAGレーザを用いたメタルボンドダイヤモンド砥石(SD120N75NB)のレーザドレッシング法について検討している.ホイールにレーザを照射するとブロンズボンドは溶融除去されるが,多くは再凝固するため,効率的にボンド剤を除去するためには圧縮空気によって溶融部を吹き飛ばす必要がある.レーザの照射エネルギーを152W以下に制限することによって,ダイヤモンド砥粒に熱的ダメージをあまり与えることなく結合剤を除去することができる., 出版者照会後に全文公開, 金沢大学理工研究域機械工学系},
 pages = {869--870},
 title = {メタルボンドダイヤモンド砥石のレーザドレッシング: パルスNd:YAGレーザによる結合剤の除去過程},
 volume = {2005 Spring},
 year = {2005}
}