@article{oai:kanazawa-u.repo.nii.ac.jp:00008029,
 author = {山名, 一男 and 山本, 之子 and 中村, 静夫 and 北川, 和夫 and 吉村, 卓二 and 真野, 稔正 and 新谷, 良智},
 issue = {1127},
 journal = {Journal of the Ceramic Society of Japan = 日本セラミックス協会学術論文誌},
 month = {Jul},
 note = {The uniaxial compression was applied with a hot press apparatus for the partially sintered performs with three chemical compositions, 3 mol% Y_2O_3-ZrO_2(TZ-3 Y) , 6 mol% Y_2O_3-ZrO_2 (TZ-6Y), and 8 mol% Y_2O_3-ZrO_2(TZ-8Y). The change in size was measured after pressing. Obviously, the densification occurred below 1350℃ and superplastic defamation appeared mainly over 1350℃. The grain size at 1500℃ was 2 μm in TZ-8 Y in comparison with 0.4 μm in TZ-3 Y. TZ-6 Y and TZ-8 Y had a porosity of 5-15% because of the rapid grain growth. Consequently, small bending strengths in the range of 20-30 kgf/mm^2 were obtained. In TZ-3 Y, the compressive deformation gave a rapid increase in; strength up to 140 kgf/mm^2. But the strength decreased above 1450℃, due to the formation of R-phase, by Kitano et al. (1987)., 金沢大学理工学域},
 pages = {758--762},
 title = {一軸圧縮応力下でのジルコニア仮焼結体の緻綴密化と変形},
 volume = {97},
 year = {1989}
}