ログイン
言語:

WEKO3

  • トップ
  • ランキング
To
lat lon distance
To

Field does not validate



インデックスリンク

インデックスツリー

メールアドレスを入力してください。

WEKO

One fine body…

WEKO

One fine body…

アイテム

  1. N. 科研費研究成果報告書, JSTプロジェクト報告書, COE報告書
  2. n-1. 科学研究費成果報告書
  3. 平成19(2007)年度

障害者の上肢姿勢保持・運動支援を目的とするワイヤ駆動型パラレルメカニズムの研究

https://doi.org/10.24517/00053778
https://doi.org/10.24517/00053778
8d04e71c-2048-4278-8946-2fbf3de95d1f
名前 / ファイル ライセンス アクション
TE-PR-TACHIYA-H-kaken TE-PR-TACHIYA-H-kaken 2008-51p.pdf (3.5 MB)
license.icon
Item type 報告書 / Research Paper(1)
公開日 2019-03-15
タイトル
タイトル 障害者の上肢姿勢保持・運動支援を目的とするワイヤ駆動型パラレルメカニズムの研究
タイトル
タイトル Development of a Parallel Wire Mechanism to Mist the Upper Body Motion and Attitude of Disabled People
言語 en
言語
言語 jpn
資源タイプ
資源タイプ識別子 http://purl.org/coar/resource_type/c_18ws
資源タイプ research report
ID登録
ID登録 10.24517/00053778
ID登録タイプ JaLC
著者 立矢, 宏

× 立矢, 宏

WEKO 131
e-Rad 10216989
金沢大学研究者情報 10216989
研究者番号 10216989

立矢, 宏

Search repository
書誌情報 平成19(2007)年度 科学研究費補助金 基盤研究(C) 研究成果報告書
en : 2007 Fiscal Year Final Research Report

巻 2006-2007, p. 51p., 発行日 2008-03
出版者
出版者 金沢大学理工研究域フロンティア工学系
抄録
内容記述タイプ Abstract
内容記述 本研究では疾病や事故等で腰部以下の機能を失った障害者に装着して上体の姿勢を保持または運動を補助し,健常者と同等な上肢作業を可能とする上体動作支援装置を,ワイヤ駆動型パラレルメカニズムを用いて開発した.ワイヤ駆動型パラレルメカニズムは,必要とする自由度に加え,すべてのワイヤを常に引張状態に保つための駆動力を要する.従って入出力関係は冗長な力学問題となるため,多方向への出力に対して必要な最小の張力を決定することは容易でない.そこで,本研究ではワイヤ駆動型パラレルメカニズムの駆動力を外力に抗する成分と,ワイヤどうしが引張しあうために必要な内力成分とに分け,外力成分に関しては固有値解析を利用して任意方向負荷に対する最小力を求め,内力成分に関しては外力成分の解析で得られた結果より力学関係式から推定する方法を提案した.提案する方法と実際の解析結果とを比較したところ,推定値は解析値の1.3倍以下となり,また,計算時間は大幅に短縮され,その有用性が確認された.以上で提案されたワイヤ張力推定方法を用いて成人男子を対象とし上体動作を補助するために必要な張力を求め,上肢動作支援装置用3自由度空間ワイヤ駆動型パラレルメカニズムの寸法を決定し,同結果を基に動作支援装置を実際に設計・製作して,その動作を確認した.また,動作の支援効果を確認するために,張力の変化を検出するロードセルを製作して各ワイヤに装着し,装着者の姿勢変化の画像記録とワイヤ張力変化の測定が同時に行える計測系を構築した.以上の装置および計測系を用いて,成人男子を被験者として上体動作支援実験を行い,装置の動作確認とともに,身体の姿勢変化およびワイヤ張力の変化を測定して解析した.その結果,装着者の上体の前後屈,側屈,旋回に関して想定通りの動作補助が行え,また,身体に対して度な負荷が動作支援時に作用しないことを,画像記録,ワイヤ張力の測定結果などから確認した.
抄録
内容記述タイプ Abstract
内容記述 This study develops an upper body motion assist system that aims at enabling disabled people with lower limb disability to control their upper body motion and attitude holding by their own will. The assist system employs a parallel wire mechanism of which the platform is suspended and moved by wires. Parallel wire mechanisms can arrange the actuators on the base and have advantages such as high power, high speed and high accuracy ; they offer other advantages in lightness and body flexibility due to the wire actuating. Thus, they are suitable for the assist system attached to the body. However, as parallel wire mechanisms have multi-degree-of-freedom and redundancy, the analysis of tension applied to the wires to drive their moving platform is difficult. This paper proposes the effective method for evaluating the maximum wire tension induced by external forces in arbitrary-direction, by the eigenvalue analysis with considering the vector-close condition. The method makes it possible to design a parallel wire mechanism to be compact and driven by small force.
By using the proposed method, we actually developed the upper body motion assist system. In order to confirm the assistance effect by the developed assist system on upper body motion, accuracy of positioning and action of forces on human body was considered. Load cell that can measure the variation of wire tension was made and equipped to the developed system. Simultaneously, an image record system that can measure the pose of both the assist system and the wearer was built up. We attached the upper motion assist system to healthy adult mates and confirmed its motion. The behaviors of the wearer and variation of the wire tensions were also measured by the aforementioned measuring system. As a result, the forward-backward flexion, side flexion and swing of the wearer can be assisted accuracy and the exceeded forces are not acted to the body. Thus, the developed parallel wire mechanism is useful to assist the upper body motion.
内容記述
内容記述タイプ Other
内容記述 研究課題/領域番号:18560129, 研究期間(年度):2006-2007
内容記述
内容記述タイプ Other
内容記述 出典:「障害者の上肢姿勢保持・運動支援を目的とするワイヤ駆動型パラレルメカニズムの研究」研究成果報告書 課題番号18560129
(KAKEN:科学研究費助成事業データベース(国立情報学研究所))
   本文データは著者版報告書より作成
著者版フラグ
出版タイプ AM
出版タイプResource http://purl.org/coar/version/c_ab4af688f83e57aa
関連URI
識別子タイプ URI
関連識別子 https://kaken.nii.ac.jp/search/?qm=10216989
関連名称 https://kaken.nii.ac.jp/search/?qm=10216989
関連URI
識別子タイプ URI
関連識別子 https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-18560129/
関連名称 https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-18560129/
関連URI
識別子タイプ URI
関連識別子 https://kaken.nii.ac.jp/report/KAKENHI-PROJECT-18560129/185601292007kenkyu_seika_hokoku_gaiyo/
関連名称 https://kaken.nii.ac.jp/report/KAKENHI-PROJECT-18560129/185601292007kenkyu_seika_hokoku_gaiyo/
戻る
0
views
See details
Views

Versions

Ver.1 2023-07-27 14:23:52.883580
Show All versions

Share

Mendeley Twitter Facebook Print Addthis

Cite as

エクスポート

OAI-PMH
  • OAI-PMH JPCOAR 2.0
  • OAI-PMH JPCOAR 1.0
  • OAI-PMH DublinCore
  • OAI-PMH DDI
Other Formats
  • JSON
  • BIBTEX

Confirm


Powered by WEKO3


Powered by WEKO3