WEKO3
インデックスリンク
アイテム
Mechanical Properties of Cu-4.0wt%Ni-0.95wt%Si Alloys with and without P and Cr Addition
https://doi.org/10.24517/00007607
https://doi.org/10.24517/00007607925aa6aa-b4c2-4b67-81b1-2c5d7bdb3b8b
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
|
|
| Item type | 会議発表論文 / Conference Paper(1) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 公開日 | 2017-10-03 | |||||||||||
| タイトル | ||||||||||||
| タイトル | Mechanical Properties of Cu-4.0wt%Ni-0.95wt%Si Alloys with and without P and Cr Addition | |||||||||||
| 言語 | ||||||||||||
| 言語 | eng | |||||||||||
| 資源タイプ | ||||||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_5794 | |||||||||||
| 資源タイプ | conference paper | |||||||||||
| ID登録 | ||||||||||||
| ID登録 | 10.24517/00007607 | |||||||||||
| ID登録タイプ | JaLC | |||||||||||
| 著者 |
Watanabe, Chihiro
× Watanabe, Chihiro× Nishijima, Fumiya× Monzen, Ryoichi× Tazaki, Kazue |
|||||||||||
| 著者別表示 |
渡邊, 千尋
× 渡邊, 千尋
× 門前, 亮一
× 田崎, 和江
|
|||||||||||
| 提供者所属 | ||||||||||||
| 内容記述タイプ | Other | |||||||||||
| 内容記述 | 金沢大学大学院自然科学研究科機能創成システム | |||||||||||
| 書誌情報 |
Materials Science Forum 巻 561-565, 号 PART 3, p. 2321-2324, 発行日 2007-01-01 |
|||||||||||
| ISSN | ||||||||||||
| 収録物識別子タイプ | ISSN | |||||||||||
| 収録物識別子 | 0255-5476 | |||||||||||
| NCID | ||||||||||||
| 収録物識別子タイプ | NCID | |||||||||||
| 収録物識別子 | AA10695957 | |||||||||||
| 出版者 | ||||||||||||
| 出版者 | Trans Tech Publications | |||||||||||
| 抄録 | ||||||||||||
| 内容記述タイプ | Abstract | |||||||||||
| 内容記述 | The effects of P and Cr addition and two-step aging on the microstructure and mechanical properties of a Cu-4wt%Ni-0.95wt%Si alloy have been examined. The addition of 0.02wt%P improves both strength and elongation because it suppresses discontinuous precipitation reaction. The Cr addition to the Cu-Ni-Si-P alloy decreases greatly the grain size, resulting in an increase in elongation. Two-step aging, pre-aging at 300 or 350°C and subsequent second-step aging at 450°C, causes an increase in strength without reducing elongation. The increase in strength is attributable to the decrease in inter-precipitate spacing by the two-step aging. The two-step aged Cu-4wt%Ni-0.95wt%Si-0.02wt%P-0.02wt%Cr alloy attains a tensile strength of 830MPa, an elongation of 13% and an electrical conductivity of 35%IACS. | |||||||||||
| 著者版フラグ | ||||||||||||
| 出版タイプ | AM | |||||||||||
| 出版タイプResource | http://purl.org/coar/version/c_ab4af688f83e57aa | |||||||||||